Design an air stripping column to remove TCE from water (i.e….

Design an air stripping column to remove TCE from water (i.e….

Design an air stripping column to remove TCE from water (i.e. determine

the stripping factor, the height and number of transfer units, and the height of the packing in the column). The initial concentration of TCE is 1.3 mg/L and this must be reduced to 75 μg/L. Use the following criteria: water flow rate of 350 gal/min; air to water ratio of 70; water temperature of 16⁰C; air temperature of 23⁰C; column diameter of 2 ft; 2-in Intalox saddles for packing material; liquid mass transfer coefficient of 20.4 cm/hr; design safety factor of 20%; and tower height(s) between 1-15 m.

Don't use plagiarized sources. Get Your Custom Essay on
Need an answer from similar question? You have just landed to the most confidential, trustful essay writing service to order the paper from.
Just from $13/Page
Order Now